Mo-Vis Powerchair Hand Warmer

The Mo-Vis Powerchair Hand Warmer’s main functionality keeps the area around a wheelchair input device warm. This increases the users’ comfort and ability to control the input device. It is intended to be fitted on any powered wheelchair with a 24 V connection.

A Mo-Vis hand air heater, powered by your power chair

Fully adjustable to individual possibilities and needs with well-though-out electronics (mini USB connection)

Recycles air instead of using air from the cold environment: it draws air in at the front, heats it and forces it out again at the front using an internal fan. This results in a considerable advantage concerning power consumption and efficiency.

A mechanical switch (e.g. Twister) can be immediately plugged in (on/off, select power levels), although you also have an on-board push button

LED indicates the status of the device

2-hands hood

A Perspex dome-shaped 2-hands hood is available to maintain the air temperature around the hands better.

Customise the Mo-Vis Powerchair Hand Warmer

Via a mini USB connection, you can connect the Hand Warmer to a PC and adjust it to unique possibilities and needs with our Configurator Software.

Several parameters can be programmed, such as auto-off (switch off after a set time), available power levels, minimum and maximum temperature and fan speed.